Neles™ Finetrol™ eccentric rotary plug valve is designed for liquid, gas, vapor and slurry control in general and demanding applications. Neles Finetrol™ is also certified to SIL 3. FC ve FG series Finetrol™ valves are economical high-performance control valves designed to provide the best possible control accuracy. In addition to these series, Neles Finetrol™ FL series provide economical, high performance valve solutions for low Cv applications. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Flowrox™ FXM Metering Pumps Read more Pinch Valves Read more Flowrox™ Progressive Cavity Pumps Read more
Neles™ segment valves are economical high-performance control valves designed for liquid, gas, vapor and slurry control applications – especially those with high capacity and wide rangeability requirements. The Neles™ R-series offers light weight, low torque control valves from 1″ low-capacity models up to 32″. Neles™ R-series V-port segment valves are used for control applications, while Neles™ R-series segmented ball valve is used for on-off applications. In addition to these series, the specially designed Neles™ R2-series MC V-port segment valve has an outlet flange one size larger than the inlet to eliminate restrictions where material can accumulate, allowing small capacities to be controlled. Both metal and soft seated options are available, depending on your process requirements. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Flowrox™ FXM Metering Pumps Read more Pinch Valves Read more Flowrox™ Progressive Cavity Pumps Read more
Neles™ globe valves are high performance control valves designed to provide the best possible control accuracy. They operate at extreme pressures and temperatures, and they are available with a variety of seat, seal, trim and actuator options to adapt to different process conditions. The quick-change trims and top-entry construction enable easy valve assembly and service, leading to extended operational life. Neles™ globe valves have a wide variety of designs with their 3-way, linear or rotary options, as well as special designs for low-noise and anti- cavitation applications. In addition, Neles™ globe valves have various certifications, including SIL 3. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Flowrox™ FXM Dozaj Pompaları Read more Pinç Vanalar Read more Flowrox™ Vidalı Pompalar Read more
The new generation of Neles™ Neldisc™ metal seat and Jamesbury™ Wafer-Sphere™ soft seat butterfly valves come equipped with the highest Cv on the butterfly valve market. With significantly lower pressure losses comes the lower need for pumping energy. The high Cv can also mean sizing down on your valves and thus also your actuators. These save energy, making your process more environmentally friendly and more profitable. On the other hand, Neles Easyflow™ JA series provide a compact, lightweight, robust, reliable solution for manual or automated on/ off applications. All butterfly valves of Valmet Flow Control provide long-lasting tightness, certified to SIL 3. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Flowrox™ FXM Dozaj Pompaları Read more Pinç Vanalar Read more Flowrox™ Vidalı Pompalar Read more
Neles™, Neles Easyflow™ and Jamesbury™ automated and manual ball valves are designed to meet the requirements of the process industries with improved process safety and efficiency. The proven technology in design, materials and coatings enhance process reliability in the most demanding shut-off and control applications. In control applications, Valmet Flow Control’s ball valves provide famous Q-trim™ technology for noise attenuation and cavitation prevention. Ball valves also have a wide range of product certification, including SIL 3. Depending on the industrial process, application and flow media, different types of ball valves are available, ranging from metal-seated ball valves to soft-seated ball valves in both automated and manual variants. Different constructions, coatings and noise and cavitation elimination solutions are also available to ensure process suitability and lasting reliable performance. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Flowrox™ FXM Dozaj Pompaları Read more Pinç Vanalar Read more Flowrox™ Vidalı Pompalar Read more
Neles™ knife gate valve is designed and equipped to handle tough and abrasive shut off applications involving slurries, powders or granular substances as well as pulp stock and paper. KA series knife gate valves with wafer design are suitable for liquids contain a maximum of 5% suspended solids, while KAB series knife gate valves with wafer design are suitable for liquids contain a maximum of 4% suspended solids. Lastly, KL series knife gate valves are suitable for liquids contain a maximum of 20% suspended solids. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Flowrox™ FXM Dozaj Pompaları Read more Pinç Vanalar Read more Flowrox™ Vidalı Pompalar Read more
Heavy duty slurry knife gate valve isolates flow even in the most demanding process conditions. The elastomer ring sleeves on both sides of the gate provide tight shut off. Flowrox™ knife gate valve follows the concept of the ease of maintenance. One-piece cast valve body structure provides both tight shut off and easy maintenance. Removable bottom plate and flushing ports increase process safety. The parts that need to be changed during maintenance are the ring sleeves and seals that are the only parts in contact with the medium. Flowrox™ SKW (Wafer type) and SKF (Flanged type) knife gate valves are highly preferred in tailing slurry lines, thickener feed and discharge lines, slurry pump and isolation of flotation cells applications. SKH series knife gate valves are designed for higher pressures (up to 20 bar). Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Flowrox™ FXM Dozaj Pompaları Read more Pinç Vanalar Read more Flowrox™ Vidalı Pompalar Read more
Flowrox™ pinch valves can be either used for shut off, isolation, or control applications, depending on your process. The pinch valves of Flowrox™ are specially designed for the most demanding applications. Flowrox™ PV, PVE and PVE/S heavy duty pinch valves are designed for shut off and control applications involving abrasive or corrosive slurries, powders or granular substances. In the open position, the valve is full bore with no flow restrictions. During closing, two pinch bars squeeze the valve sleeve shut on the center line, symmetrically. Bubble tight shut-off is provided even if solids have built up on the sleeve wall. Flowrox™ PVG and PVEG pinch valves are robust and cost effective with simple, single-sided closing mechanism. PVG valve has a strong valve body and opening tags on the sleeve for complete opening and closing. PVEG valve has a corrosion resistant and light-weight plastic body. Both kinds of valves offer substantial savings based on improved performance, long service lifetime and low total cost of ownership. Flowrox™ PVG and PVEG valves are ideal for low cycle applications involving abrasion, corrosion and aggressive slurries. Main spare parts for valves are rubber sleeves. It is the only part in contact with the medium. It is also easy to maintain as sleeve change requires no special tools. Technologically advanced Flowrox™ rubber sleeves guarantee high wear and corrosion resistance, a trouble-free operation, and extended lifetime. Standard Flowrox™ PV, PVE and PVG sleeves are equipped with opening tags to ensure full valve opening in all process conditions. Various material options are also available, depending on the end-use application. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Flowrox™ FXM Dozaj Pompaları Read more Pinç Vanalar Read more Flowrox™ Vidalı Pompalar Read more