Smoke: Smoke – COPA is designed to monitor pellet size distribution in pelletising discs and pellet drums. – It provides continuous and online information about pellet size distribution. – The data can be used to control your process and pellet quality. The system can be integrated into the plant control system. – Water and chemical (bentonite etc.) usage can be controlled automatically. – COPA monitors and records grain size distribution in real time. – The data can be used to control your process and pellet quality. The system can be integrated into the plant control system. Features High resolution camera with 22 fps, Energy-saving lighting with powerful LEDs, Independent electrical and pneumatic control cabinet with IP66 protection class, Low space requirement (600x600x350 mm), Integration into existing control system (Industrial Ethernet, Profibus/-net, OPC UA, etc.), 15.6’ touch panel. Share on facebook Share on twitter Share on linkedin Share on whatsapp Bilyalı Değirmen Read more AG/SAG Değirmen Read more Dik Milli Değirmen Read more
Smoke: Smoke – Reliable online monitoring of bearing status. – Data and alarms can be transferred to the existing control system. This enables data analysis. – Visual and audible warnings facilitate timely intervention. – The control panel allows you to see all important KPIs on a single page. – Unexpected stoppages are prevented. – Thanks to planned stops, only the damaged part is replaced, reducing maintenance and spare parts costs. – CEGIS is a universal tool for monitoring your mill mechanics. – The focus is on monitoring pinion temperatures and the pinion bearing vibrations that occur. Optionally, this can be flexibly extended for additional monitoring of the main mill bearings and motor or gear vibrations. – For the evaluation, the values at the time of commissioning are taken as reference and their long-term development is observed and evaluated. – Depending on the bearing width, 2 to 4 infrared sensors are used for temperature measurement. – The sensors are protected against contamination by compressed air. Continuous safe monitoring is ensured. – Vibration sensors can be magnetically positioned. – Integration into existing control systems (Industrial Ethernet, Profibus/-net, OPC UA, etc.) – 15.6’ touch panel. Share on facebook Share on twitter Share on linkedin Share on whatsapp AgglomeratIon Drums Read more Ball Mills Read more AG/SAG Mills Read more
CEOPS performs fully automatic sampling and sample testing and provides continuous information on particle size distribution. It is available in different versions for wet and dry grinding processes. The data can be used for process monitoring and to control the quality of the milled material. It can take and process samples from 4 different points simultaneously. The process of switching between each sample and testing takes approximately 10 minutes. Processes a grain size range of 1 μm to 3,000 μ Depending on the application, laser diffractometry or ultrasonic sensor is used. Properties, – Independent electrical and pneumatic control cabinet. – Space requirement < 2m². – Compressed air consumption is approx. 23 Nl/h. – Can be integrated into the process control system (industrial Ethernet, Profibus/-net, OPC UA, etc.) – Depending on the measuring equipment, optionally integrated density measurement in wet processes. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp AgglomeratIon Drums Read more Ball Mills Read more AG/SAG Mills Read more