The Valmet Polymer Concentration Measurement (Valmet PCM) measures polymer concentration in real time, enabling optimization of polymer use in industrial and municipal processes. The Valmet Polymer Concertation Measurement (Valmet PCM) delivers the most reliable and accurate polymer concentration measurement for municipal and industrial wastewater treatment. Knowing the actual polymer concentration in a process allows facilities to significantly reduce polymer consumption through accurate preparation and dosing. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Valmet Total Solids Measurement (Valmet TS) Read more Valmet Low Solids Measurement – Valmet LS Read more Valmet Dry Solids Measurement – Valmet DS Read more
The Valmet Sludge Dewatering Optimizer (Valmet SDO) is an advanced sludge dewatering control application. Used together with Valmet Wastewater Measurements, the Valmet SDO turns accurate measurements into process enhancements for significant savings. For operators, the Valmet SDO is very simple. You just need to select a control mode. The control mode determines how process loop setpoints are defined, which can be manual or through different calculation methods. Once configured, the optimizer work 24/7 to monitor and control dewatering for optimal polymer and energy consumption to achieve your target dry cake total solids amount. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Toplam Katı Madde Ölçümü Read more Düşük Katı Madde Ölçümü Read more Kuru Katı Madde Ölçümü Read more
Using advanced microwave technology, the Valmet High Solids Measurement (Valmet HS) delivers stable and accurate consistency measurement for a wide range of industrial and municipal applications. Using the accurate dry solids measurement from the Valmet HS, control systems can fully optimize a variety of applications to save energy, reduce chemical use and improve sustainability. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Valmet Total Solids Measurement (Valmet TS) Read more Valmet Low Solids Measurement – Valmet LS Read more Valmet Dry Solids Measurement – Valmet DS Read more
The Valmet Dry Solids Measurement (Valmet DS) is engineered for dried wastewater sludge (dry cake) optimization. Accurate online measurement of solids from Valmet DS provides significant savings opportunities. Valmet DS uses sophisticated microwave technology to determine the exact cake solids up to 35%. Using the accurate dry solids measurement provided by Valmet DS, operators can fully optimize dewatering. When it comes to transportation expenses, dry cake optimization results in extreme cost reductions. Higher cake solids drive down the volume of cake that needs to be hauled away from the plant. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Valmet Total Solids Measurement (Valmet TS) Read more Valmet Low Solids Measurement – Valmet LS Read more Valmet Dry Solids Measurement – Valmet DS Read more
Valmet LS measurements accurate online measurement of suspended solids The Valmet Low Solids Measurement (Valmet LS) is the first and only solution that can reliably and accurately measure suspended solids in centrate. Used after sludge dewatering, the Valmet LS helps operators select the right type and amount of polymer and optimize dewatering. Using advanced optics technology developed over decades by Valmet, the Valmet LS is a solution operators can really trust. The Valmet LS continuously measures the suspended solids content from 0 to 5,000 mg/L. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Valmet Total Solids Measurement (Valmet TS) Read more Valmet Low Solids Measurement – Valmet LS Read more
Valmet TS measurements control and optimize total solids using advanced microwave technology. The most reliable and accurate online measurement for wastewater, the Valmet TS creates new opportunities to save while improving process performance. The Valmet TS determines total organic and inorganic solids content from 0% to 50%. Valmet TS sensors also have ATEX, IECEx, and UKEX certifications and can be used in Explosion Hazardous Areas. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Valmet Total Solids Measurement (Valmet TS) Read more
Lyncis Online Elemental Analysers are optical analysers based on plasma technology that measure elemental or compound analyses of ores on the conveyor belt in real time. The device does not contain any radioactive source and therefore does not emit X-Ray, Gamma or Neutron radiation. It is of great importance to determine and monitor the chemical composition of ore in a plant. However, this process takes long hours in the laboratory using conventional methods and sometimes the results can only be obtained the next day. This makes it impossible to identify non-conformities in the raw material feeding to the plant, at any stage of production or in the final product and to take the necessary measures immediately. On the other hand, in many plants, various chemicals are used as inputs together with the ore and the dosage of these chemicals should be adjusted with the quality of the ore entering the plant. This process is not possible with conventional methods. Since Lyncis analysers measure instantaneously, the necessary adjustments can be made on time. Lyncis analysers are capable of measuring all elements. The results can be obtained on an elemental basis as well as on a compound basis (H₂O, SiO₂, CaO, MgO, Fe₂O₃ etc.). Lyncis analysers can be used for the following processes; – Real-Time Process Optimisation – Precise Blending – Classification According to Ore Grade – Product Quality Control Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Online element analyser Read more
MoistScan online moisture analyser has a microwave technology developed to analyse and measure moisture content with high precision and in real time. Unlike alternative technologies, MoistScan generates a microwave field that analyzes virtually all material on the belt conveyor and allows monitoring of reported result accounts for variations in moisture throughout the product. In addition to instantaneous moisture measurement, it also provides access to data such as time-averaged moisture and dry tonnage. Smoke: Smoke The product is minimally affected by varying in bed depth, vertical or horizontal segregation, varying particle size distribution, profiling anomalies and temperature fluctuations. MoistScan®’s flexible design allows installation at any point in your process, enabling you to measure and control moisture where it is most critical. Conveyor belts, horizontal belt filters, vertical disc filters, screw-feeders, chutes, silos and pipelines used for transferring slurry and various materials are some of the application options that MoistScan can be installed. Share on facebook Share on twitter Share on linkedin Share on whatsapp MoistScan is exceptionally easy to install, set-up, calibrate and maintain. It is delivered fully assembled. It seamlessly integrates with your plant control system without any modifications to existing structures to enable installation. Users can change settings, adjust calibration and access data whilst close or remotely via the web browser interface and optional 3G modem connection. Apart from periodic calibration verification, installed and set-up correctly, the MoistScan is virtually maintenance-free. It has almost no moving parts and maintenance consumables. In addition, optional remote or on-site support can be requested from RTI engineers about the product or its calibration. MoistScan Online Nem Analizörü Read more
Headquartered in Barcelona, Spain, Derypol develops and produces Flocculants and Coagulants for industrial applications. With its product portfolio, it significantly meets market needs, especially regarding water and waste treatment polymers. Derypol aims to make water use more efficient and help protect the ecosystem by allowing the recycling of wastewater and process water. aims to be. Flocculants produced as powder or emulsion (solvent-based liquid) in the Derypol product range HIMOLOC Technology products, the latest evolution in the world, are included. This special technology of water-based liquid polymers stands out for its versatility, high efficiency, ease of use and sustainability (free of solvents and surfactants). Among the different series combining common monomers and other special monomers, there are also completely Acrylamide-Free flocculants. Products HIMOLOC Flocculants HYFLOC Coagulants Dust Prevention products Advantages Solution preparation time is 10 minutes. Water and energy requirements are much lower than powder products. It dissolves 50 times faster than emulsion products and 120 times faster than powder products. It does not contain solvents, oils, surfactants and dust. Industries where Derypol Hymoloc Technology is used, Purification of wastewater Mining Pulp & Paper Industry Personal Care & Home Care Products Industry Petroleum Industry Dye and Textile Industry Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp HIMOLOC Technology Read more
The magnetic drum/separator is designed for automatic cleaning of mixtures containing larger amounts of iron and iron oxides, which are intended to be separated from the raw material/ore itself. For example, in a gold process, it is easy to separate clay and water from gold ore mixed with gangue minerals and water because of the large density difference. However, it is not so easy to separate iron with clay and water in the same equipment. To increase efficiency and speed up the ore cleaning process, MDR has developed a magnetic drum/separator. With such separation, large amounts of iron and iron oxide are eliminated before entering the concentrator. As a result, the yield of ore from the concentrator is much higher and further process of removing impurities from the ore is faster and more affordable. Also, in accordance with difficult working conditions, the entire magnetic drums are made of stainless steel and is additionally protected with polyurethane due to the high abrasion of the material. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Overbelt Electromagnetic Separator Read more Permanent Magnetic Plate Read more Cascade Magnetic Separator Read more
With automatic cascade magnetic separator, micron size ferromagnetic particles can be automatically extract from materials that are being transported into the silos. It is a new solution for pneumatic transport (up flow of the material) and very suitable for heavy working conditions. It can be customized according to the customer’s needs. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Overbelt Electromagnetic Separator Read more Permanent Magnetic Plate Read more Cascade Magnetic Separator Read more
It is recommended to install in places where ferromagnetic contaminants are rarely expected to occur. When selecting an appropriate model, the weight and geometric shape of the ferromagnetic contaminants to be removed, as well as the distance of the material from the magnetic separator should be considered. They are simple and affordable solutions. No maintenance required. Smoke: Smoke Share on facebook Share on twitter Share on linkedin Share on whatsapp Overbelt Electromagnetic Separator Read more Permanent Magnetic Plate Read more